Epson 9600 Service Manual - Page 190
P_THICK Sensor/P_THICK Sensor_0.3 ASSY
UPC - 010343841888
View all Epson 9600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 190 highlights
EPSON Stylus Pro 7600/9600 4.4.5 P_THICK Sensor/P_THICK Sensor_0.3 ASSY P_THICK Sensor ASSY P_THICK_0.3 Sensor ASSY 1. Remove the R Side Cover. (p.160) 2. Remove the L Side Cover. (p.163) 3. Remove the I/H Cover. (p.164) 4. Remove the H Top Cover. (p.165) 5. Push the paper hold lever down to the rear. 6. Remove the harness from the connector of the P_THICK Sensor/P_THICK_0.3 Sensor. 7. Remove the one (CUPS: M3×6) screw securing the sensor bracket and remove the bracket along with the both sensors. CHECK P O IN T Sensor bracket position is adjusted at the factory before shipment. When the sensor bracket is to be removed on the service site, you are advised to mark the mounting position before removal for easy adjustment at reassembly. 8. Unhook the sensor from the sensor bracket and remove the sensor. A D JU S TM E N T R E Q U IR E D If you move the sensor bracket position, perform the necessary adjustment. Refer to "5.1.4.7 P_THICK/P_THICK_0.3 Sensor ASSY Adjustment" (p.215) Revision A P_THICK_0.3 Sensor ASSY Bring the Paper Set Lever into the release position and bring down the Detection Arm rearward. P_THICK Sensor ASSY Screws (M4×8) ×2 Figure 4-59. P_THICK and P_THICK_0.3 Sensors Removal Disassembly & Assembly Disassembly and Assembly of Paper Feed Mechanism 190