Epson 9600 Service Manual - Page 243
Rear Sensor Position
UPC - 010343841888
View all Epson 9600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 243 highlights
EPSON Stylus Pro 7600/9600 5.2.3.9 Rear Sensor Position Make this adjustment to detect the length of cut paper correctly. To ensure a maximum printable area relative to the paper tail end, adjust the Rear Sensor position inside the firmware with the nozzle position as the reference. Set an A3 sheet in the portrait position, make the printer draw a horizontal line (black 1-dot line) at 14 mm from the sheet tail end. Then measure the distance from the sheet tail end to the line and input the measured value as the compensation value. The input value, handled as the compensation value, is written in the Flash ROM. Resolution: 0.1mm Pattern drawing method: 360dpi, Uni-D, 240CPS, NormalDot2 NOTE 1: This adjustment is necessary in the manufacturing process. After that, however, execution of this item is not necessary even once Feed Correction is made. 2: When this item is selected, the printer requests setting of cut paper irrespective of the presence or absence of paper. As the Rear Sensor position, measure the distance between the sheet tail end and the drawn line and input the measured value. Press the [Enter] key on the "Rear Sensor Pos." input screen, and the display will change to "Test Print". REAR SENSOR POSITION ADJUSTMENT PROCEDURE 1. Start the Self-diagnostic Function: Power OFF → [Paper Feed ∆]+[Paper Feed ∇]+[Cut/Eject] → Power ON 2. Display "Adj: Rear Sensor Pos.": [Paper Feed ∇] → [SelecType >] → [Paper Feed ∆] x5 3. Print the pattern: Set a sheet of A3-size plain paper (portrait) and press [Enter ↵ ]. (See Figure 5-36) 4. Measure the distance: Using a measuring rule, measure the distance. Input the measured value on the panel. (See Figure 5-37) Revision A Please Set Cut Sheet Set cut paper and press [Enter] Printing Pattern After printing, drop the paper. Printing end Paper Width : ? 297.0mm [Enter] RearSen. Pos. : ? 14.0mm [Pause] Key →To "Rear Sensor Pos." [Paper Feed ∆]Key: + [Paper Feed ∇]Key : - *Setting is possible in increments of 0.1 mm. Figure 5-36. Menu Transition for Rear Sensor Position Adjustment Rear Sensor position correction Paper Feed Direction Figure 5-37. Rear Sensor Position Adjustment Pattern Adjustment Self-diagnostic Function 243