Epson 9600 Service Manual - Page 184
CR Encoder Scale Timing Fence
UPC - 010343841888
View all Epson 9600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 184 highlights
EPSON Stylus Pro 7600/9600 4.3.10 CR Encoder Scale (Timing Fence) C A U T IO N When unlocking the carriage, do not move the carriage by about 2 cm or more with the cutter pushed into the innermost position; otherwise, the cutter edge would be damaged. Take great care not to scratch the CR Encoder Scale. (If the CR Encoder Scale is scratched, the encoder sensor will output wrong signals, thus resulting in abnormal operation of the carriage or error occurrence.) 1. Remove the R Side Cover. (p.160) 2. Remove the L Side Cover. (p.163) 3. Remove the I/H Cover. (p.164) 4. Remove the H Top Cover. (p.165) 5. Remove the CR Encoder Sensor ASSY. (p.178) 6. Disengage the CR Encoder Scale (Timing Fence) from the CR Encoder Scale Fastening Spring on the L Side Frame side. 7. Remove the CR Encoder Scale from the CR Encoder Scale Holders. NOTE: The number of CR Encoder Scale Holders is as follows: Stylus Pro 7600: 2 guides Stylus Pro 9600: 3 guides 8. While pushing the cutter area gently, shift the carriage to the left about 2 cm to unlock the carriage and then move the carriage to the left from the capping position. (See Figure 4-24) 9. Disengage the CR Encoder Scale from the hook on the CR Encoder Scale Holder R and draw out the CR Encoder Scale from the carriage area. A D JU S TM E N T R E Q U IR E D After assembling the CR ENC, the following adjustments should be made. "5.1.4.8 CR Encoder Sensor ASSY Adjustment (p.215)" Revision A CR Encoder Scale CR Encoder Scale Fastening Spring CR Encoder Scale Holder Figure 4-48. Releasing from the CR Encoder Scale Fastening Spring CR Encoder Scale CR Encoder Scale Holder R Figure 4-49. CR Encoder Scale Removal Disassembly & Assembly Disassembly and Assembly of Carriage (CR) Mechanism 184