Epson 9600 Service Manual - Page 231
Rear AD Adjustment
UPC - 010343841888
View all Epson 9600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 231 highlights
EPSON Stylus Pro 7600/9600 5.2.3.1 Rear AD Adjustment The optimum value for resistance of the Rear Sensor is automatically detected and determined. (See Figure 5-18) The values displayed are "D/A adjustment value", "ON-OFF difference" and "ON level" as named from left. Appropriate values ON-OFF difference: 040 or more ON level: 095 or less NOTE: The appropriate values are represented in hexadecimal notation. Paper to be used: A3-size Kimoto Micro Tracing Paper #300 LMB #F751 (1057723) ADJUSTMENT AND CHECKING PROCEDURE 1. Start the Self-diagnostic Function: Power OFF → [Paper Feed ∆]+[Paper Feed ∇]+[Cut/Eject] → Power ON 2. Set paper: Set a sheet of A3-size Kimoto Micro Tracing Paper #300 LMB #F751 (1057723) on the HP side. 3. Display "Adj: Rear AD": [Paper Feed ∇] → [SelecType >] → [Paper Feed ∇] x2 4. Detect the adjusted values: [SelecType] → [Enter ↵ ] 5. Check the values for properness: Check that the values are within the respective ranges specified above. If they are not within the ranges, clean the sensor surface or replace it with a new one. Revision A [Enter] Start [Enter] Adjustment Detection end Detection error end [Enter] Adjust again RearAD : ? 088 04A 090 040 or more 95 or less Figure 5-18. Menu Transition for Rear AD Adjustment Adjustment Self-diagnostic Function 231