Epson 9600 Service Manual - Page 42
Detect Paper Width, 4.3.9, Detect Skew Error, 4.3.10, Job Timeout Setting
UPC - 010343841888
View all Epson 9600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
EPSON Stylus Pro 7600/9600 Roll Paper Width X X (*) X Printable Area X X Cut Position or Border Figure 1-8. Roll Paper Margin (1) Roll Paper Width X X (*) Clipped Area X Printable Area Revision A Vertical Line 1.4.3.8 Detect Paper Width When the paper width detection function is OFF, the printer can print on the platen if the image to be printed is bigger than the set paper (larger than borderless print area). Therefore the user must bear responsibility in selecting this function OFF setting. At paper initial feeding or print starting, the paper is fed by the distance between grid roller and #1 nozzle unconditionally. The print starts from that position. (No back-feed in the other sequences) Even when paper has too low reflection to be detected, the paper is fed so as not to print on the platen. The same specifications are applied to sheets and auto loading. The above-mentioned paper width detection OFF sequence is just for the first page in the case of roll paper. The paper auto cutting function does not check whether paper is cut successfully or not. 1.4.3.9 Detect Skew Error With PAPER NOT STRAIGHT = OFF setting, the "PAPER NOT STRAIGHT" error will not be displayed and printing will be continued. With this setting, even if the printing image is out of paper because the paper is not straight, the printer will not inform the user of such an error. Therefore, the user must bear responsibility in selecting this function OFF setting. 1.4.3.10 Job Timeout Setting When print data is interrupted longer than setting time although data receiving is available, the print job is regarded as the end, and the printer runs paper feeding operation. X X Figure 1-9. Roll Paper Margin (2) Product Description Operating Panel 42