Epson 9600 Service Manual - Page 44
Cutter position adjustment, 4.3.13, Auto margin refresh
UPC - 010343841888
View all Epson 9600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
EPSON Stylus Pro 7600/9600 1.4.3.12 Cutter position adjustment Cutter position can be adjusted with this mode. Cutter position adjustment pattern is printed, and the cutter is adjusted with cutter position number entered by users. NOTE: This adjustment is effective for top/bottom no margin print. Setting procedure 1. Set paper. 2. Enter Cutter position adjustment menu with the panel. 3. Print cutter position adjustment pattern. 4. Select the best pattern number and enter the number. NOTE 1: When "1 cut" is selected with panel, it is not operated. 2: Setting value can be selected from 1 to 17 with "Paper Feed" button. Level structure of Cutter position adjustment menu Pause READY SelecType Paper Source PRINTER SETUP SelecType Paper Source PRINTER SETUP CUTTER ADJ SelecType Paper Source CUTTER ADJ EXEC Enter PRINTING ALGNMNT PATTERN CUTTER ADJ *8 Cutter position adjustment pattern Output paper size : A4 Font : Built-in font Print sample : See following picture. Revision A Figure 1-10. Cutter position adjustment pattern Number in print pattern and cutter position Number in print pattern 1 2 3 ... Adjustment value ... ... 15 16 17 ... 1.4.3.13 Auto margin refresh When this setting is ON, paper edge is automatically cut to prevent print dirt after 4 sides no margin print. The cutting length is depends on the minimum cut length at this time. Product Description Operating Panel 44