Epson 9600 Service Manual - Page 217
Cutter Solenoid ASSY or Paper Guide L Adjustment, 1.4.12, Damper ASSY Adjustment, 1.4.13,
UPC - 010343841888
View all Epson 9600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 217 highlights
EPSON Stylus Pro 7600/9600 Revision A 5.1.4.11 Cutter Solenoid ASSY or Paper Guide L Adjustment Described below are the adjustment items to be made once the Cutter Solenoid (p.177) has been replaced or the Paper Guide L has been reinstalled. Adjusting tools: Cutter Positioning Jig #F800 Scale 1000mm #F713 Scale Stopper #F714 Adjustment items (steps): Table 5-13. Required Adjustment Items Step Adjustment Item 1 Cutter Positioning Adjustment 2 Checking for Proper Cutting and Cutter Position (Power OFF → [Paper Feed ∆]+[Paper Feed ∇]+[Cut/Eject] → Power ON) 3 Checking for Proper Cutting Pressure 4 Feed Correction + T&B Adjustment See p.269 p.271 p.220 p.239 5.1.4.12 Damper ASSY Adjustment Described below are the adjustment items to be made once the Damper ASSY (p.173) has been replaced. CHECK P O IN T Execute ink discharge ("Ink Blowing") before removing the Damper ASSY. Refer to "5.2.3.20 Clean Head (p.256)". Secure the coupling screw and the ink tube by tightening at the specified torque. (2 ∼ 2.5 kg/f) Adjustment items (steps): Table 5-14. Required Adjustment Items (Damper ASSY) Step Adjustment Item (Power OFF → [Paper Feed ∆]+[Paper Feed ∇]+[Cut/Eject] → Power ON) 1 Including initial filling 2 Head Nozzle Checking (Cleaning) 3 Leak check pattern printing 4 Test Pattern Printing See p. 220 p. 259 p. 237 p. 259 p. 255 5.1.4.13 Release Sensor (I/H Lever) Adjustment No adjustment is required 5.1.4.14 Battery No adjustment is required. Execute "Initialize RTC (p.83)". Adjustment Overview 217