Epson PowerLite 8150i Administrator's Manual - Page 30
Connecting S-Video, ports of the projector insert
View all Epson PowerLite 8150i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Connecting S-Video If your video source has an S-Video jack, you can use it to project a higher quality video image. However, you'll need an S-Video cable, which may be included with your video source, or can be purchased separately. Before starting, make sure the projector and your video source are turned off. 1. For S-Video, insert one end of an S-Video cable into the projector's S-Video connector. Insert the other end into the S-video port of your video source. S-Video connector S-Video cable 2. To use the projector's built-in speaker system, connect the RCA audio cable to the S-Audio/Audio2 ports of the projector (insert the white plug into the L port and the red plug into the R port). Connect the plugs at the other end of the cable to the audio output ports of the video source. 3. If you're planning to use S-video for the picture-in-picture video source, be sure to set the P in P menu option as described on page 78. Setting Up the Projector 29