Epson PowerLite 8150i Administrator's Manual - Page 31
Connecting Component (BNC) Video, s built-in sound system, connect the RCA audio
View all Epson PowerLite 8150i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Connecting Component (BNC) Video If your video source has component (BNC) connectors, you can use them to project a higher quality video image. Before starting, make sure the projector and your video device are turned off. 1. Connect the three ends of a BNC cable into the projector's R, G, and B ports. (Don't connect the cables to the projector's H/C Sync or VSync ports.) Computer 2/ Component Video connectors BNC cable 2. Connect the red, green, and blue leads at the opposite end of the cable to the corresponding connectors on your video source. 3. If the image doesn't display properly, you may need to change the BNC option in the projector's Setting menu to YCbCr (see page 79). To use the projector's built-in sound system, connect the RCA audio cable to the S-Audio/Audio2 ports of the projector (insert the white plug into the L port and the red plug into the R port). Connect the plugs at the other end of the cable to the audio output ports of the video source. 30 Setting Up the Projector