Epson PowerLite 8150i Administrator's Manual - Page 39
Selecting the Image Source
View all Epson PowerLite 8150i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
You see a drop-down list: select the desired setting 3. Select the desired settings. 4. When you're done, click Set. The EasyMP.net main menu screen appears: click Set Follow the instructions in the next section to switch between picture sources and display the desired image. Selecting the Image Source If the projector is connected to a computer or video source, you can display the source image by following these steps: 1. Turn on your computer or video device. (If you're projecting a video, press Play on the video device.) 2. If you've connected a computer running Windows and it displays a New Hardware Found message saying that it has found a plug-and-play monitor, click Cancel. 38 Displaying and Adjusting the Image
38
Displaying and Adjusting the Image
You see a drop-down list:
3.
Select the desired settings.
4.
When you
’
re done, click
Set
.
The EasyMP.net main menu screen appears:
Follow the instructions in the next section to switch between picture
sources and display the desired image.
Selecting the Image Source
If the projector is connected to a computer or video source, you can
display the source image by following these steps:
1.
Turn on your computer or video device. (If you
’
re projecting a
video, press
Play
on the video device.)
2.
If you
’
ve connected a computer running Windows and it displays
a New Hardware Found message saying that it has found a
plug-and-play monitor, click
Cancel
.
select the
desired
setting
click Set