Epson PowerLite 8150i Administrator's Manual - Page 90
Installing Batteries in the Remote Control
View all Epson PowerLite 8150i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Installing Batteries in the Remote Control Follow these steps to install or replace the remote control's batteries: 1. Press the tab to release the battery compartment cover. 2. Remove any old batteries. tab 3. Insert two AA batteries as shown. 4. Replace the battery compartment cover. Before using the remote control, make sure the switch on its side is in the ON position (see below). With fresh batteries installed, the remote control should work at a distance of about 30 feet from the projector; as the batteries get old, the remote control's range decreases and you may need to replace the batteries. caution When replacing batteries, take the following precautions: s Don't mix old and new batteries. s Replace batteries as soon as they run out. If the batteries leak, wipe away battery fluid with a soft cloth. If fluid gets on your hands, wash them immediately. s Remove batteries if you won't be using the remote control for a long time. Maintaining and Transporting the Projector 89