Epson PowerLite 8150i Administrator's Manual - Page 89

Resetting the Lamp Timer, caution

Get Epson PowerLite 8150i PDF manuals and user guides View all Epson PowerLite 8150i manuals
Add to My Manuals
Save this manual to your list of manuals

Page 89 highlights

caution Do not touch the glass portion of the lamp assembly. Touching the glass could result in premature lamp failure. 6. Gently insert the new lamp as shown below. Make sure it's inserted all the way. Tighten the screws on the new lamp. 7. Replace the lamp cover and tighten its screws. (Make sure the lamp cover is securely fastened. The projector turns itself off if the lamp cover is open.) 8. Reset the lamp timer as described in the next section. Resetting the Lamp Timer After you install a new lamp, you need to reset the timer so the projector can keep track of how many hours it has been used. Follow these steps: 1. Plug in the projector and turn it on (see page 36). 2. After the projection lamp comes on, press the Help button and hold it down for at least 5 seconds. You see the Help menu and then a message asking if you want to reset the lamp ON time. 3. Use the left arrow button (control panel) or press left on the Enter button (remote control) to select Yes. 4. Press Enter to reset the timer. 88 Maintaining and Transporting the Projector

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
88
Maintaining and Transporting the Projector
6.
Gently insert the new lamp as shown below. Make sure it
’
s
inserted all the way.
Tighten the screws on the new lamp.
7.
Replace the lamp cover and tighten its screws. (Make sure the
lamp cover is securely fastened. The projector turns itself off
if the lamp cover is open.)
8.
Reset the lamp timer as described in the next section.
Resetting the Lamp Timer
After you install a new lamp, you need to reset the timer so the
projector can keep track of how many hours it has been used. Follow
these steps:
1.
Plug in the projector and turn it on (see page 36).
2.
After the projection lamp comes on, press the
Help
button and
hold it down for at least 5 seconds. You see the Help menu and
then a message asking if you want to reset the lamp ON time.
3.
Use the left arrow button (control panel) or press left on the
Enter
button (remote control) to select
Yes
.
4.
Press
Enter
to reset the timer.
caution
Do not touch the glass
portion of the lamp assembly.
Touching the glass could
result in premature lamp
failure.