Epson Stylus Pro 10000 - Photographic Dye Ink User Manual - Page 107
Checking Printer Status, Printing a Status Check, Monitoring and Configuring the Printer
View all Epson Stylus Pro 10000 - Photographic Dye Ink manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Monitoring and Configuring the Printer | 5-3 Note See page 1-9 for instructions on using the printer's control panel to print a nozzle check. Checking Printer Status You can use the control panel to print a status check or nozzle check. These prints allow you to test the printer without sending a print job. You can also check the amount of ink remaining, total number of prints, and the status of your cutter blade and other printer parts. Printing a Status Check The status check shows the current default settings, amount of ink remaining in each cartridge, page count, and the status of various printer parts. To display this information on the control panel instead of printing it out, see page 5-4. Follow these steps to print the status check: 1. Load a sheet of paper in the printer, following the instructions on page 2-10. (You can print the status check on roll paper, but you will use more paper.) 2. Press the SelecType button on the control panel until you see TEST PRINT MENU on the display. 3. Press the Item button until you see STATUS CHECK=PRINT on the display. 4. Press the Enter button. The status check prints. The amount of ink left or component life is indicated as follows: E*****F = full (or full life remaining) E**** F = 3/4 full (or 3/4 life remaining) E*** F = 1/2 full (or 1/2 life remaining) E** F = 1/4 full (or 1/4 life remaining) E* F = nearly empty (or service life near end) E F = empty (or service life ended) 5. Press the SelecType button to exit the Test Print menu. 5-3