Epson Stylus Pro 10000 - Photographic Dye Ink User Manual - Page 30
Connecting to a Parallel Port (Windows Only), Connecting to the IEEE 1394 (FireWire) Port
View all Epson Stylus Pro 10000 - Photographic Dye Ink manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
1-12 | Setting Up the Printer Connecting to a Parallel Port (Windows Only) To use the printer's built-in parallel interface, you need a shielded, bidirectional, parallel cable. Follow the steps below to connect the printer to your computer: 1. Make sure both the printer and your computer are turned off. 2. Plug the cable connector securely into the printer's interface. Then squeeze the wire clips together until they lock into place on both sides. 3. Plug the other end of the cable into the computer's parallel port. Connecting to the IEEE 1394 (FireWire) Port To connect the printer to the IEEE 1394 port, you need a standard shielded IEEE 1394 cable. Follow the steps below to connect the printer to your computer. 1. Make sure both the printer and your computer are turned off. 1-12