Epson Stylus Pro 10000 - Photographic Dye Ink User Manual - Page 113
Turning Off Paper Monitoring Features, Selecting the Printer’s Interface, Selecting the Printer
View all Epson Stylus Pro 10000 - Photographic Dye Ink manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Monitoring and Configuring the Printer | 5-9 You can use the + or - button to cycle through all three settings. 3. When you select the setting you want, press the Enter button to save it. Then press the SelecType button to exit the Printer Setting menu. Turning Off Paper Monitoring Features The printer normally stops and displays an error message if you try to print an image wider than the paper, or if paper is fed at an angle. You can turn off the paper size check and/or paper alignment check if you don't want to use these monitoring features. However, ink may be sprayed on the platen if you print an image that is too wide for the paper. Follow these steps to turn off paper monitoring: 1. Press the SelecType button. PRINTER SETTING MENU appears on the display. 2. Press the Item button repeatedly until PAPER SIZE CHK=ON or PAPER ALIGN CHK=ON appears on the display. 3. Press the + button. PAPER SIZE CHK=OFF or PAPER ALIGN CHK=OFF appears on the display. 4. Press the Enter button to save your new setting. 5. Press the SelecType button to exit the Printer Setting menu. Selecting the Printer's Interface The printer includes three interfaces: parallel, USB, and FireWire. You can also install an optional interface card for networking. By default, the printer automatically switches to whichever interface is receiving data. You can use the control panel to select an individual interface for sending data to the printer. Follow these steps: 1. Press the SelecType button. PRINTER SETTING MENU appears on the display. 5-9