HP 3800 HP Color LaserJet 3800 Printer - Software Technical Reference - Page 132

● Colored ● Rough Cardstock media can be manually printed on the second side, but no change occurs to the print mode. Transparencies and labels should not be manually printed on the second side. To print a multiple-page document, follow these steps: 1. Select the Print on Both Sides (Manually) check box. 2. Click OK. The even-number pages of the document print. 3. When the control panel shows the MANUALLY FEED message, insert the stack of media (on which the even-number pages have been printed) as indicated in the following figure. Figure 3-4 Print on Both Sides Instructions dialog box When you have completed the steps that appear in the dialog box, the second half of the print job prints on the back side of the stack of media. The driver does not require the program to specifically support odd- and even-page printing, because the driver coordinates this function. Flip Pages Up Use the Flip Pages Up check box, which is available only when Print on Both Sides is selected, to specify the duplex-binding option. By default, the Flip Pages Up check box is not available. The following table demonstrates the results of selecting this check box, depending on the media orientation that is selected on the Basics tab. 108 Chapter 3 HP traditional print drivers for Windows ENWW