HP Jornada 680 HP Jornada 600 Series Handheld PC - (English) User's Guide - Page 94
Connecting to corporate e-mail and network resources, onsite, To disconnect from the network
View all HP Jornada 680 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
88 | HP Jornada 600 Series Users Guide To disconnect from the network 1. Double-tap the HP connection icon in the status area of the taskbar. 2. In the HP dialup window, tap Disconnect. Connecting to corporate e-mail and network resources onsite If you want corporate e-mail and Internet service only (with no access offsite), you will need: • An installed network interface card (NIC)-that is properly configured with the IP address of your DNS and WINS servers. (Your network administrator can give you this information.) • An account with your corporate network-including an IP address for your HP Jornada, if it is not dynamically assigned. • A network (LAN) connection-a network cable with the appropriate connector for your NIC. Installing the network interface card (NIC) Before you can connect directly to a network, you must install an NIC and properly configure it with the IP address of your DNS and WINS servers. (Check with your network administrator for this information.) You must use an NIC to connect your HP Jornada directly to a LAN. NICs are available from several manufacturers as PC Card accessories. (For a list of recommended PC Card NICs, go to the Hewlett-Packard Web site at www.hp.com/jornada.) Install the PC Card NIC in the PC Card slot on your HP Jornada, and then attach the network cable according to the instructions provided by your card manufacturer. In addition to the PC Card NIC, you will need to install the appropriate driver software to configure the NIC. Drivers for Proxim 7400 and Socket LP-E LAN