HP Neoware e90 ezRemote Manager 3.0 User Manual - Page 14
Building an asset database, broadcast IP address click on the select / deselect indicator to - default password
View all HP Neoware e90 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Asset Manager select Assets from the Actions dropdown menu. Asset Manager (Locate thin client appliances) Left-click to select or deselect an address 3 Select a broadcast IP address. Additional addresses Right-click to change Select the number of and delay between SNMP broadcasts. Filter your broadcast using the appliance operating system. Click Password to use a thin client access password with appliances discovered during this asset location operation. FYI In order to locate clients on subnets through a router or switch, you may need to make changes in the router/switch configuration: SNMP broadcasts must be passed to the subnet. For more information, see "Appendix A: Broadcast SNMP and Router Configuration" on page 79. ezRemote Manager locates Neoware thin client appliances on your network by sending a Simple Network Management Protocol (SNMP) broadcast request from the server. You need to select a broadcast IP address (click on the select / deselect indicator to the left of the address). Note: The default broadcast address for each network interface card (NIC) (as determined from your server's registry) is already selected when the dialog first appears. 14 Building an asset database