HP Workstation x1000 hp workstations general - adaptec RAID installation guide - Page 14

Adaptec RAID Installation Guide 1 The Adaptec 3200S and 3400S differ only in that the Adaptec 3400S has a factory-installed daughter card that provides two additional channels. 2 The Adaptec 2400A supports ATA/66 and ATA/100 hard drives only. 3 SCSI RAID controllers support Ultra160 and legacy hard drives and non-hard-drive devices, such as CD and tape drives. 4 Adaptec RAID software supports up to 32 hard drives per array and up to 2 Terabytes of storage capacity. 5 VHDCI (Very High Density Connector Interface). 6 Requires a special hot-swap carrier. 7 Indicates when activity has occurred that may require operator attention. about the documentation The complete documentation set for Adaptec RAID controllers consists of the following: s Adaptec RAID Installation Guide (this book)-Contains information that helps you to configure and install your Adaptec RAID controller and attached devices. s Adaptec Storage Manager Pro User's Guide-Describes how to use the Storage Manager Pro application to manage your controller and storage subsystem. s Adaptec Adaptec Storage Management Software User's Guide-Describes how to use SMOR, Adaptec Storage Manager software, and the RAIDUTIL command line utility. Both Storage Manager Pro and Storage Manager provide online help for creating and managing RAIDs, including topical and pop-up help displays. The User's Guides for both applications are included on the Adaptec RAID Installation CD. Refer to page 1-9 for details. using the Adaptec RAID installation CD The Adaptec RAID Installation CD contains the RAID Management Software, device drivers, and user documentation needed to install and support your Adaptec RAID Controller. 1-6