HP Workstation x1000 hp workstations general - adaptec RAID installation guide - Page 19
overview of the installation process
View all HP Workstation x1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
introduction overview of the installation process The following steps provide an overview of the process of installing and setting up the controller and configuring the RAID: 1 Read this entire chapter. 2 Verify that your motherboard is compatible with the controller. For details, refer to motherboard compatibility on page 1-3. 3 Gain familiarity with the features and functions of the Adaptec RAID Installation CD. Refer to page 1-6 for details. 4 Install and configure your Adaptec RAID controller, cache memory module, and hard drives according to the instructions in Chapter 2. 5 Use SMOR to check your cache memory module or set up your boot array. Refer to Chapter 2. 6 Install the controller driver according to the instructions in Chapter 3. If you are building a new system, installing the driver involves installing the operating system, too. Chapter 3 presents numerous scenarios for installing the driver. Identify the scenario that applies to your system before proceeding. When installing the driver , you may need to use SMOR to configure the controller or create the array. 7 Optional-Install Adobe Acrobat Reader or Viewer if you do not have Acrobat installed on your computer. If you need to upgrade Acrobat, do so now. You need Acrobat to view and print the documentation contained on the Adaptec RAID Installation CD. 8 Select the appropriate storage management application for your system. For an overview of the available systems, refer to storage management software overview on page 1-14. For details, read the Adaptec Storage Management Software User's Guide and Adaptec Storage Manager Pro Software User's Guide provided on the Adaptec RAID Installation CD. 1-11