HP Workstation x1000 hp workstations general - adaptec RAID installation guide - Page 27
installing your controller
View all HP Workstation x1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
2 installing your controller In this Chapter ® configuring ATA drives 2-1 ® configuring SCSI devices 2-2 ® installing additional cache memory 2-7 ® installing the battery backup module 2-9 ® installing the controller 2-9 ® using SMOR 2-11 configuring ATA drives When configuring drives for the Adaptec 2400A, you need to s Select and configure compatible drives.. s Attach supplied ATA cables. ATA drives Your Adaptec 2400A controller supports ATA/66 and ATA/100 hard drives only. Use ATA/100 cables only. RAID drives should be as alike as possible in terms of capacity and performance. Set the drives to operate as a master (factory default). If previously used, format the drive according to manufacturer's recommendations. 2-1
2-1
2
installing your controller
In this Chapter
configuring ATA drives
When configuring drives for the Adaptec 2400A, you need to
■
Select and configure compatible drives..
■
Attach supplied ATA cables.
ATA drives
Your Adaptec 2400A controller supports ATA/66 and ATA/100
hard drives only. Use ATA/100 cables only.
RAID drives should be as alike as possible in terms of capacity
and performance. Set the drives to operate as a master (factory
default). If previously used, format the drive according to
manufacturer’s recommendations.
configuring ATA drives
2-1
configuring SCSI devices
2-2
installing additional cache memory
2-7
installing the battery backup module
2-9
installing the controller
2-9
using SMOR
2-11