HP Workstation x1000 hp workstations general - adaptec RAID installation guide - Page 98
SCSI bus status LEDs
View all HP Workstation x1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Adaptec RAID Installation Guide s ECCERR (ECC Error)-Lit (red) when a correctable or noncorrectable error has been detected in a cache memory module. After an error has been corrected (assuming the error is correctable), ECCERR remains lit until the controller is powered down. Refer to Appendix A for the location of the LEDs on your controller. cache status LED - Adaptec 3210S/3410S only These controllers provide the ECCERR (ECC Error) cache status LED. This LED is lit (red) when a correctable or noncorrectable error has been detected in the cache memory module. After the error has been corrected (assuming the error is correctable), ECCERR remains lit until the controller is powered down. Refer to Appendix A for the location of ECCERR on your controller. SCSI bus status LEDs SCSI bus status LEDs - Adaptec 3200S/3400S only The following bus status LEDs are provided: s TRMPWR-A, TRMPWR-B-Lit when termination power is supplied by the controller for the respective channels. s TRMEN-A, TRMEN-B-Lit when termination is enabled on the controller for the respective channels. s TRMENHD-A-High-byte enable LED for Channel A that indicates that the upper 8 bits of a 16-bit bus are terminated to support an 8-bit bus segment. This LED is lit when the High-Only option is selected for bus termination. SCSI bus status LEDs - Adaptec 3210S only The following bus status LEDs are provided: s TPOWER_A, TPOWER_B-Lit when termination power is supplied by the controller for the respective channels. B-4