HP Workstation x1000 hp workstations general - adaptec RAID installation guide - Page 64
Sco Unix
View all HP Workstation x1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Adaptec RAID Installation Guide 5 Start up the server. During startup, press Ctrl+A to start SMOR. Use SMOR to create the RAID. For details, refer to using SMOR on page 2-11. 6 Start NetWare and insert the driver disk you created in Step 2. 7 When the console prompt appears, type load nwconfig and press Enter. 8 Select Driver. 9 Select Disk Driver. 10 Install i2opci.nlm and bkstrosm.ham. Specify a:\ as the location for the files. SCO UNIX The Adaptec RAID Installation CD contains a driver for each version of SCO. You use the CD to create driver disks. Two disks are required to store all of the drivers. To create the driver disks 1 Start up the system from the CD and select Create driver disks. 2 Select the SCO operating system you are using. 3 Insert floppy disks when prompted until all drivers are copied. Alternatively, you can use the dd command to copy the disk images directly from the CD to a floppy disk. The following disk images are on the Adaptec RAID Installation CD: Open Desktop 3.x OpenServer 5.x Driver /packages/ Open_Desktop_3/image /packages/ Open_Server_5/image Storage Manager and RAIDUTIL /packages/ Open_Desktop_3/apps/sm /packages/ Open_Server_5/apps/sm 3-26