HP Workstation x1000 hp workstations general - adaptec RAID installation guide - Page 33
installing additional cache memory
View all HP Workstation x1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
installing your controller installing additional cache memory Adaptec RAID controllers can be upgraded with additional cache memory. See cache memory module on page 1-12 for additional information about memory modules for cache memory. To install cache memory modules 1 Ground yourself and take appropriate ESD precautions. 2 If necessary, power down your system and remove the RAID adapter. Note: Adaptec 3200S/3210S/3400S/3410S with battery backup module only-Remove the battery backup module before installing or removing cache memory. 3 Proceed to the appropriate section for your controller: s seating the module - Adaptec 3200S/3400S only on page 2-7. s seating the module - Adaptec 2400A/2100S/3210S/ 3410S only on page 2-8. seating the module - Adaptec 3200S/3400S only Holding the circuit board and module by the edges, slide the module into the socket as shown below. Refer to Appendix A for socket locations. 2-7