HP Workstation x1000 hp workstations general - adaptec RAID installation guide - Page 53

PCI Card, Update Driver, Finish, Cancel, Driver

Get HP Workstation x1000 PDF manuals and user guides View all HP Workstation x1000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 53 highlights

installing the driver 14 Open the Device Manager. Look for a PCI Card entry under the Other Devices category. There may be multiple entries if you have multiple Adaptec RAID controllers installed. There may also be an entry called PCI Memory Controller. 15 Select PCI Card and then select Update Driver from the Driver tab. Note: If you are not prompted for a PCI card or memory controller driver, or if the Device Manager shows PCI Card with a yellow exclamation mark in the Other Devices list, you might need a patch for your motherboard chipset to recognize multifunction bridge controllers. Contact your motherboard vendor and apply the patch. After the patch is installed and the system is restarted, Windows will repeat the device discovery process. If you are installing the operating system, go back to Step 14 and continue the procedure. If you are adding an Adaptec RAID controller to an existing configuration, go to Step 6 on page 3-17 and continue the procedure. 16 Insert the driver disk you created earlier (refer to page 3-11) and let Windows search for the drivers. 17 Windows should identify the PCI card as Adaptec I2O RAID Host Adapter. Select Finish. At this point, you might need to force Windows to copy the driver from the floppy drive instead of the CD drive. 18 When prompted regarding testing the device ROM, select Cancel. 19 Open the Device Manager. If the Other Devices category shows a PCI memory controller, select it, click the Driver tab, and select Update Driver. 20 Let Windows search for the drivers on the disk your created earlier (refer to page 3-11). 21 Windows should now identify the PCI memory controller as Adaptec I2O Memory Adapter. Select Finish. At this point, you might need to force Windows to copy the driver from the floppy drive instead of the CD drive. 3-15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
3-15
installing the driver
14
Open the Device Manager. Look for a
PCI Card
entry under
the Other Devices category. There may be multiple entries if
you have multiple Adaptec RAID controllers installed.
There may also be an entry called
PCI Memory Controller
.
15
Select
PCI Card
and then select
Update Driver
from the
Driver tab.
Note:
If you are not prompted for a PCI card or memory
controller driver, or if the Device Manager shows
PCI
Card
with a yellow exclamation mark in the Other
Devices list, you might need a patch for your
motherboard chipset to recognize multifunction bridge
controllers. Contact your motherboard vendor and apply
the patch. After the patch is installed and the system is
restarted, Windows will repeat the device discovery
process. If you are installing the operating system, go
back to
Step 14
and continue the procedure. If you are
adding an Adaptec RAID controller to an existing
configuration, go to
Step 6 on page 3-17
and continue the
procedure.
16
Insert the driver disk you created earlier (refer to
page 3-11
)
and let Windows search for the drivers.
17
Windows should identify the PCI card as
Adaptec I
2
O RAID
Host Adapter
. Select
Finish
. At this point, you might need
to force Windows to copy the driver from the floppy drive
instead of the CD drive.
18
When prompted regarding testing the device ROM, select
Cancel
.
19
Open the Device Manager. If the Other Devices category
shows a PCI memory controller, select it, click the
Driver
tab, and select
Update Driver
.
20
Let Windows search for the drivers on the disk your created
earlier (refer to
page 3-11
).
21
Windows should now identify the PCI memory controller as
Adaptec I
2
O Memory Adapter
. Select
Finish
. At this point,
you might need to force Windows to copy the driver from the
floppy drive instead of the CD drive.