IBM 8669 Hardware Maintenance Manual - Page 12
Is The System Part Of A Cluster?, Did You Receive Both Of The Correct Responses? - manual
![]() |
UPC - 087944636496
View all IBM 8669 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
001 IS THE SYSTEM PART OF A CLUSTER? YES. Schedule maintenance with the customer. Shut down all systems related to the cluster. Run storage test. NO. Go to step 002 . 002 IF THE SYSTEM IS NOT PART OF A CLUSTER: v Power-off the computer and all external devices. v Check all cables and power cords. v Set all display controls to the middle position. v Power-on all external devices. v Power-on the computer. v Record any POST error messages displayed on the screen. If an error is displayed, look up the first error in the "POST error codes" on page 93. v Check the information LED panel System Error LED; if on, see "Information panel system error LED" on page 85. v Check the System Error Log. If an error was recorded by the system, see "Symptom-to-FRU index" on page 83. v Start the Diagnostic Programs. See "Starting the diagnostic programs" on page 15. v Check for the following responses: 1. One beep. 2. Readable instructions or the Main Menu. 003 DID YOU RECEIVE BOTH OF THE CORRECT RESPONSES? NO. Find the failure symptom in "Symptom-to-FRU index" on page 83. YES. Run the Diagnostic programs. If necessary, refer to "Starting the diagnostic programs" on page 15. If you receive an error, go to"Symptom-to-FRU index" on page 83. If the diagnostics completed successfully and you still suspect a problem, see "Undetermined problems" on page 102. 2 Hardware Maintenance Manual: xSeries 342 Type 8669
![](/manual_guide/products/ibm-8669-hardware-maintenance-manual-753832d/12.png)