IBM 8669 Hardware Maintenance Manual - Page 98
Fixed Disk with SCSI ID NN on RAID adapter in PCI slot S., PCI Hot-Swap Latch Assembly
![]() |
UPC - 087944636496
View all IBM 8669 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Error Code/Symptom FRU/Action 011-XXX-000 (Failed COM1 Serial Port test) 1. System Board 011-XXX-001 (Failed COM2 Serial Port test) 1. System Board 014-XXX-000 (Failed Parallel Port test) 1. System Board 015-XXX-001 (USB interface not found, board damaged) 1. System Board 015-XXX-015 (Failed USB external loopback test) 1. Make sure parallel port is not disabled. 2. Re-run USB external loopback test. 3. System board 015-XXX-198 (USB device connected during USB test) 1. Remove USB devices from USB1 and USB2. 2. Re-run USB external loopback test. 3. System Board 020-XXX-000 (Failed PCI Interface test) 1. System Board 020-XXX-001 (Failed Hot-Swap Slot 1 PCI 1. PCI Hot-Swap Latch Assembly Latch test) 2. System Board 020-XXX-002 (Failed Hot-Swap Slot 2 PCI 1. PCI Hot-Swap Latch Assembly Latch test) 2. System Board 020-XXX-003 (Failed Hot-Swap Slot 3 PCI 1. PCI Hot-Swap Latch Assembly Latch test) 2. System Board 020-XXX-004 (Failed Hot-Swap Slot 4 PCI 1. PCI Hot-Swap Latch Assembly Latch test) 2. System Board 030-XXX-000 (Failed Internal SCSI interface test) 1. System Board 035-XXX-099 1. No adapters were found. 2. If adapter is installed re-check connection. 035-XXX-S99 (Failed RAID test on PCI slot 1. Adapter S, check System Error Log before replacing a FRU) 2. SCSI Backplane 3. Cable 035-XXX-SNN (Check System Error Log before replacing a FRU, NN = SCSI ID of failing fixed disk) 1. Fixed Disk with SCSI ID NN on RAID adapter in PCI slot S. 035-253-S99 (RAID adapter initialization failure) 1. ServeRAID Adapter in slot S is not configured properly. Obtain the basic and extended configuration status and refer to the ServeRAID Hardware Maintenance Manual for more information. 2. Cable 3. SCSI Backplane 4. Adapter 075-XXX-000 (Failed Power Supply test) 1. Power Supply 089-XXX-001 (Failed Microprocessor test) 1. VRM 1 for Microprocessor 1 2. Microprocessor 1 88 Hardware Maintenance Manual: xSeries 342 Type 8669
![](/manual_guide/products/ibm-8669-hardware-maintenance-manual-753832d/98.png)