IBM 8669 Hardware Maintenance Manual - Page 91
AC distribution box, System board, from the chassis clips
![]() |
UPC - 087944636496
View all IBM 8669 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
AC distribution box Note: Before beginning, read "Safety information" on page 109, "Before you begin" on page 40 and "Handling static-sensitive devices" on page 41. To remove the AC distribution box: 1. Turn off server and disconnect all external cables and power cords. 2. Remove the cover. See "Removing the cover and bezel" on page 42. 3. Remove screw 1 . 4. Pull the AC distribution box 1 toward front of machine in order to release it from the chassis clips 3 . 5. Remove the two hot-swap power supplies. 6. Pull down on the cable receptacle 5 to release it from the chassis. Note: To install the receptacle, push up into the chassis opening of slot 4 . Be sure to properly replace receptacles, 1 to 1 and 2 to 2, as labeled. System board FRU information (service only) 81
![](/manual_guide/products/ibm-8669-hardware-maintenance-manual-753832d/91.png)