IBM 8669 Hardware Maintenance Manual - Page 88
On/off reset board, Diskette/CD-ROM drive, Disconnect the cable from the system board, connector J11.
![]() |
UPC - 087944636496
View all IBM 8669 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
To remove the LED board: 1. Turn off server and disconnect all external cables and power cords. 2. Remove the cover. See "Removing the cover and bezel" on page 42. 3. Disconnect the LED board cable from the system board, connector (J39). 4. Remove the two screws 1 . 5. Carefully slide out the board 2 . On/off reset board Note: Before beginning, read "Safety information" on page 109, "Before you begin" on page 40 and "Handling static-sensitive devices" on page 41. To remove the on/off reset board: 1. Turn off server and disconnect all external cables and power cords. 2. Remove the cover. See "Removing the cover and bezel" on page 42. 3. Disconnect the cable from the system board, connector (J11). 4. Remove the screw 1 . 5. Gently pull off the board 2 . Diskette/CD-ROM drive Note: Before beginning, read "Safety information" on page 109, "Before you begin" on page 40 and "Handling static-sensitive devices" on page 41. To remove the diskette/CDROM drive: 78 Hardware Maintenance Manual: xSeries 342 Type 8669
![](/manual_guide/products/ibm-8669-hardware-maintenance-manual-753832d/88.png)