IBM 8669 Hardware Maintenance Manual - Page 36
Additional Configuration/Setup Utility menu choices, Integrated System Management Processor Settings
UPC - 087944636496
View all IBM 8669 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Select this choice to view and identify system resources used by PCI devices. PCI devices automatically communicate with the server configuration information. This usually results in automatic configuration of a PCI device. After making changes, select: - PCI MLT to save the changes and return to the Advanced Setup menu. - PCI Interrupt Routing to ignore the changes, restore the previous settings, and return to the Advanced Setup menu. - Integrated System Management Processor Settings Select this choice to set the server to automatically restart after a nonmaskable interrupt (NMI) occurs. The default setting for this menu item is Enabled. v Error Logs Select this choice to view the three most recent error codes and messages that the system generated during POST. You can also select Clear error logs to clear the contents of this log. Note: System status messages available in the System Error Log in the Configuration/Setup Utility program are provided only for trained IBM service personnel. v Save Settings Select this choice to save your customized settings. v Restore Settings Select this choice to delete your changes and restore the previous settings. v Load Default Settings Select this choice to cancel your changes and restore the factory settings. v Exit Setup If you have made any changes, the program will prompt you to save the changes or exit without saving the changes. Additional Configuration/Setup Utility menu choices When you install an IBM Remote Supervisor Adapter in the server, you can view additional menu choices in the Configuration/Setup Utility program, such as: v System Information Select this choice to display information about the server. v PCI Slot Information Select this choice to view the properties of adapters installed in PCI slots. v Administrator Password Select this choice to set or change the administrator password. v Remote Control Security Settings Select this choice to set a remote-control password. When you set a remote-control password, you can also set the number of failed attempts to enter the correct remote-control password, and the duration before another attempt is allowed. For a list of supported options for the server, refer to http://www.ibm.com/pc/us/compat/ on the World Wide Web. To order an optional Remote Supervisor Adapter, contact your IBM Reseller or an IBM marketing representative. 26 Hardware Maintenance Manual: xSeries 342 Type 8669