IBM 8669 Hardware Maintenance Manual - Page 67
Pull out and lift up the release lever; then, remove the terminator card
![]() |
UPC - 087944636496
View all IBM 8669 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
3. Remove the fan 3 assembly by lifting the handle on top of the fan assembly and pulling the fan assembly away from the server. Note: The illustrations in this document may differ slightly from your hardware. Fan 3 assembly Air-baffle assembly 4. Lift and remove the air-baffle assembly from the server. 5. Install the microprocessor. a. Pull out and lift up the release lever; then, remove the terminator card from the microprocessor socket. Store the terminator card in a safe place, such as the static-protective package that your new microprocessor comes in. Installing options 57
![](/manual_guide/products/ibm-8669-hardware-maintenance-manual-753832d/67.png)
3.
Remove the fan 3 assembly by lifting the handle on top of the fan assembly
and pulling the fan assembly away from the server.
Note:
The illustrations in this document may differ slightly from your hardware.
Fan 3 assembly
Air-baffle assembly
4.
Lift and remove the air-baffle assembly from the server.
5.
Install the microprocessor.
a.
Pull out and lift up the release lever; then, remove the terminator card from
the microprocessor socket. Store the terminator card in a safe place, such
as the static-protective package that your new microprocessor comes in.
Installing options
57