IBM 8669 Hardware Maintenance Manual - Page 99
System Management: Failed
![]() |
UPC - 087944636496
View all IBM 8669 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Error Code/Symptom FRU/Action 089-XXX-002 (Failed Optional Microprocessor test) 1. VRM 2 for Optional Microprocessor 2 2. Optional Microprocessor 2 166-198-000 System Management: 1. Rerun the Diagnostic Test Aborted (Unable to communicate with ASM adapter. It may be busy. Run the test again.) (Communication with the ASM adapter has failed.) 2. Fix other error conditions and retry. These include other Failed System Management tests and items logged in the optional Remote Supervisor Adapter's System Error Log. 3. Disconnect all server and option power cords from server, wait 30 seconds, reconnect, and retry 4. Remote Supervisor Adapter, if installed 5. System Board 166-201-001 System Management: Failed 1. If installed, reseat I2C cable between Remote Supervisor Adapter (I2C Bus Error(s). ISMP indicates I2C (in PCI slot 1/J44) and planar (J54) errors on bus 0. Potential FRUs: Memory DIMMs, system board.) 2. Reseat Memory DIMMs 3. Memory DIMMs 4. System board 166-201-002 System Management: Failed 1. Reseat I2C cable between operator information panel and planar (I2C Bus Error(s)) (ISMP indicates I2C (J39) errors on bus 2. Potential FRUs: LED front panel, system board.) 2. Operator information panel 3. System board 166-201-003 System Management: Failed 1. Reseat cables between Power Backplane and planar (I2C Bus Error(s)) (ISMP indicates I2C error on bus 3. Potential FRUs: power 2. Power Backplane backplane, system board.) 3. System board 166-201-004 System Management: Failed 1. If installed, reseat I2C cable between DASD backplane and DASD (I2C Bus Error(s)) (ISMP indicates I2C error I2C on planar (J9) on bus 4. Potential FRUs: DASD backplane, system board.) 2. System board 166-201-005 System Management: Failed 1. Reseat Memory DIMMs (I2C Bus Error(s) ISMP indicates I2C errors on bus 0, 1, or 5. Potential FRUs: Memory 2. Reseat processors DIMMs, CPUs, system board.) 3. Memory DIMMs 4. Processors 5. System board 166-250-000 System Management: Failed 1. Reseat I2C cables between Remote Supervisor Adapter (in PCI slot (I2C cable is disconnected. Reconnect I2C 1/J44) and planar (J54) cable between Remote Supervisor Adapter and System Board.) 2. I2C Cable(s) 166-260-000 System Management: Failed 1. Disconnect all server and option power cords from server, wait 30 (Unable to restart ASM adapter.) (Restart seconds, reconnect, and retry. ASM adapter Error. After restarting, ASM communication was lost. Unplug and cold 2. Reseat Remote Supervisor Adapter (in PCI slots 1/J44). boot to reset ASM adapter.) 3. Remote Supervisor Adapter 166-342-000 System Management: Failed 1. Ensure the latest firmware levels for Remote Supervisor Adapter (ASM adapter BIST indicate failed tests.) and BIOS. 2. Disconnect all server and option power cords from server, wait 30 seconds, reconnect, and retry 3. Remote Supervisor Adapter Symptom-to-FRU index 89
![](/manual_guide/products/ibm-8669-hardware-maintenance-manual-753832d/99.png)