Lantronix SLB Lantronix SLB - User Guide - Page 102

8: Device Ports To enter SLP commands: 1. Enter the following: SLP Login SLP Password User ID for logging into the SLP. Enter password for logging into the SLP. Retype Password Re-enter password for logging into the SLP. SLP Status/Info Outlet Status Environmental Status Infeed Status System Info Note: If there is an SLP and an SLP Expansion chassis, the SLP is Tower A and the Expansion chassis is Tower B. For Tower A or Tower B, select All Outlets or Single Outlet to view the status of all outlets or a single outlet of the SLP. If you select Single Outlet, enter a value of 1-8 for the SLP8 or 1-16 for the SLP16. Click the Outlet Status link to see the status of the selected outlet(s). Click the link to view the environmental status (e.g., temperature and humidity) of the SLP. Click the link to view the status of the data the SLP is receiving. Click the link to see system information pertaining to the SLP. SLP Commands Restart SLP Control Outlet To restart the SLP, select the checkbox. For Tower A or Tower B, select All Outlets or Single Outlet and the number of the outlet to be controlled (1-8 for the SLP8 or 1-16 for the SLP16) and select the command for the outlet (No Action, Power On, Power Off, Cycle Power). No Action is the default. 2. Click the Apply button. Device Port - Sensorsoft Device Devices made by Sensorsoft are used to monitor environmental conditions. 1. In the Connected to field above the IP Settings section of the Device Port Settings page, select Sensorsoft. 2. Click the Device Commands link. The following page displays: SLB - Branch Office Manager User Guide 102