Lantronix SLB Lantronix SLB - User Guide - Page 114
Power Outlets, Console Port Commands
View all Lantronix SLB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
8: Device Ports 3. Click the Apply button to save the changes. Console Port Commands The following CLI commands correspond to the web page entries described above. To configure console port settings: set consoleport Parameters: baud databits stopbits group parity flowcontrol showlines timeout To view console port settings: show consoleport Power Outlets The SLB has eight outlets that can provide power to other units in an IT environment. Each outlet can be configured and controlled through the SLB. The SLB can issue an SNMP trap if the total current for all eight outlets exceeds a specified threshold. To configure a power outlet: 1. Click the Devices tab and select the Power Outlets option. The following page displays: Note: Clicking any of the red P1 through P8 buttons, located at the top of each page displayed, allows controlled configuration of the power outlets. SLB - Branch Office Manager User Guide 114