Lantronix SLB Lantronix SLB - User Guide - Page 119

Figure 8-12 View Host Lists 8: Device Ports 2. View, add, or update the following: Host List Id Host List Name Retry Count Authentication Displays after a host list is saved. Enter a name for the host list. Enter the number of times the SLB should attempt to retry connecting to the host list. Select to require authentication when the SLB connects to a host. Host Parameters Host Protocol Port Escape Sequence Name or IP address of the host. Protocol for connecting to the host (TCP, SSH, or Telnet). Port on the host to connect to SLB. The escape character used to get the attention of the SSH or Telnet client. It is optional, and if not specified, Telnet and SSH use their default escape character. For Telnet, the escape character is either a single character or a two-character sequence consisting of '^' followed by one character. If the second character is '?', the DEL character is selected. Otherwise, the second character is converted to a control character and used as the escape character. For SSH, the escape character is a single character. 3. You have the following options:  To add a host to the host list, click the right arrow. The host displays in the Hosts box.  To remove a host from the host list, select the host in the Hosts box and click the left arrow.  To give the host a higher precedence, select the host in the Hosts box and click the SLB - Branch Office Manager User Guide 119