Lantronix SLB Lantronix SLB - User Guide - Page 285
NFS and SMB/CIFS Commands, Remote NFS Directory
View all Lantronix SLB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 285 highlights
14: Command Reference NFS and SMB/CIFS Commands set nfs mount Syntax set nfs mount Parameters locdir mount remdir rw Enables or disables read/write access to remote directory. Description Mounts a remote NFS share. The remdir and locdir parameters are required, but if they have been specified previously, you do not need to provide them again. set nfs unmount Syntax set nfs unmount Description Unmounts a remote NFS share. set cifs Syntax set cifs Parameters eth1 eth2 state workgroup Description Configures the SMB/CIFS share, which contains the system and device port logs. The admin config command saves SLB configurations on the SMB/CIFS share. set cifs password Syntax set cifs password SLB - Branch Office Manager User Guide 285
14: Command Reference
SLB - Branch Office Manager User Guide
285
NFS and SMB/CIFS Commands
set nfs mount
Syntax
set nfs mount <one or more parameters>
Parameters
locdir <
Directory
>
mount <
enable
|disable>
remdir <
Remote NFS Directory
>
rw <enable|
disable
>
Enables or disables
read/write access to remote directory.
Description
Mounts a remote NFS share.
The remdir and locdir parameters are required, but if they have been specified previously, you do
not need to provide them again.
set nfs unmount
Syntax
set nfs unmount <1|2|3>
Description
Unmounts a remote NFS share.
set cifs
Syntax
set cifs <one or more parameters>
Parameters
eth1 <
enable
|disable>
eth2 <
enable
|disable>
state <enable|
disable
>
workgroup <Windows workgroup>
Description
Configures the SMB/CIFS share, which contains the system and device port logs.
The
admin config
command saves SLB configurations on the SMB/CIFS share.
set cifs password
Syntax
set cifs password