Lantronix SLB Lantronix SLB - User Guide - Page 147

9: USB Port Retype Restart Delay CBCP Server Allow No Callback CBCP Client Type Re-enter password for dialing out to a remote system.May have up to 64 characters. The number of seconds after the timeout and before the SLB attempts another connection. The default is 30 seconds. For CBCP Server state, allows "No Callback" as an option in the CBCP handshake in addition to User-defined Number and Admin-defined Number. For CBCP Client, this selects the number that the client would like to use for callback - either a user-defined number passed to the server (specified by the Fixed Dial-back Number) or an administrator-defined number determined by the server based on the login that is PAP or CHAP authenticated. IP Settings Service Telnet Port SSH Port TCP Port Authenticate (checkbox) 4. Click Apply. The available connection services for this modem port (Telnet, SSH, or TCP). Only one can be active at a time. The default is None. Telnet Port Telnet session port number to use if you selected Telnet. Defaults:  USB Port U1: 2049  USB Port U2: 2050  Range: 1025-65535 The SSH session port number to use if you selected SSH. Defaults:  USB Port U1: 3049  USB Port U2: 3050  Range: 1025-65535 The TCP (raw) session port number to use if you selected TCP. Defaults:  USB Port U1: 4049  USB Port U2: 4050  Range: 1025-65535 If selected, the SLB requires user authentication before granting access to the port. Authenticate is selected by default for Telnet Port and SSH Port, but not for TCP Port. SLB - Branch Office Manager User Guide 147