Lantronix SLB Lantronix SLB - User Guide - Page 165

11: User Authentication Shortcut To add a user based on an existing user: 1. Display the existing user on the Local/Remote Users Settings page. The fields in the top part of the page display the current values for the user. 2. Change the Login to that of the new user. It is best to change the Password too. 3. Click the Apply button. To edit a local user: 1. On the Local/Remote Users page, select the user and click the Add/Edit User button. The Local/Remote User Settings page displays. 2. Update values as desired. 3. Click the Apply button. To delete a local user: 1. On the Local/Remote Users page, select the user and click the Add/Edit User button. The Local/Remote User Settings page displays. 2. Click the Delete User button. 3. Click the Apply button. To change the sysadmin password: 1. On the Local/Remote Users page, select sysadmin and click the Add/Edit User button. The Local/Remote User Settings page displays. 2. Enter the new password in the Password and Retype Password fields. Note: You can change Escape Sequence and Break Sequence, if desired. You cannot delete the UID or change the UID, port permissions, or custom menu. 3. Click the Apply button. Local Users Commands The following CLI commands correspond to the web page entries described above. To configure local accounts (including sysadmin) who log in to the SLB by means of SSH, Telnet, the Web, or the console port: set localusers add|edit Parameters: accessoutlets allowdialback breakseq changenextlogin changepassword clearports custommenu SLB - Branch Office Manager User Guide 165