Lantronix SLB Lantronix SLB - User Guide - Page 151

Figure 10-1 Terminal Server 10: Connections SLB Branch Office Manager Server Serial Connections Telnet Sessions (via Network connection) VT100 Terminals Remote Access Server In this setup, the SLB is connected to one or more modems by its device ports. Configure the device ports on the Device Ports > Settings web page by selecting the Dial-in option in the Modem Settings section. Most customers use the modems in PPP mode to establish an IP connection to the SLB and either Telnet or SSH into the SLB. They could also select text mode where, using a terminal emulation program, a user could dial into the SLB and connect to the command line interface. Figure 10-2 Remote Access Server Phone System SLB Branch Office Manager Serial Modems Connections Network Connections Internal Network Reverse Terminal Server In this scenario, the SLB has one or more device ports connected to one or more serial ports of a mainframe server. Users can access a terminal session by establishing a Telnet or SSH session to the SLB. To configure the SLB, select the Enable Telnet In or Enable SSH In option on the Device Ports > Settings page. Figure 10-3 Reverse Terminal Server PC Unix Server SLB Branch Office Manager PC Serial Sessions Telnet/SSH PC Sessions SLB - Branch Office Manager User Guide 151