Lantronix SLB Lantronix SLB - User Guide - Page 59

6: Basic Parameters Enabling IP Filters On the Network > IP Filter page, you can enable all filters or disable all filters. Note: There is no way to enable or disable individual filters. To enable IP filters: 1. Enter the following: Enable IP Filter Packets Dropped Packets Rejected Test Timer Time Remaining Select the Enable IP Filter checkbox to enable all filters, or clear the checkbox to disable all filters. Disabled by default. Displays the number of data packets that the filter ignored (did not respond to). View only. Displays the number of data packets that the filter sent a "rejected" response to. View only. Timer for testing IP Filter rulesets. Select No to disable the timer. Select Yes, minutes (1-120) to enable the timer and enter the number of minutes the timer should run. The timer automatically disables the IP Filters when the time expires. Indicates how many minutes are left on the timer before it expires and IP Filters disabled. View only. Configuring IP Filters The administrator can add, edit, delete, and map IP filters. Note: A configured filter has no effect until it is mapped to a network interface. See Mapping a Ruleset on page 62. To add an IP filter: 1. On the Network > IP Filter page, click the Add Ruleset button. The following page displays: SLB - Branch Office Manager User Guide 59