Lantronix SLB Lantronix SLB - User Guide - Page 60
Rule Parameters
View all Lantronix SLB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
6: Basic Parameters Figure 6-3 Network > IP Filter Ruleset (Adding/Editing Rulesets) Rulesets can be added or updated on this page. 2. Enter the following: Ruleset Name Name that identifies a filter; may be composed of letters, numbers, and hyphens only. (The name cannot start with a hyphen.) Example: FILTER-2 Rule Parameters IP Address(es) Subnet Mask Protocol Specify a single IP address to act as a filter. Example: 172.19.220.64 - this specific IP address only Specify a subnet mask to act determine how much of the address should apply to the filter. Example: 255.255.255.255 to specify the whole address should apply. From the drop-down list, select the type of protocol through which the filter will operate. The default setting is All. SLB - Branch Office Manager User Guide 60