Lantronix SLB Lantronix SLB - User Guide - Page 52
: Basic Parameters, Requirements
View all Lantronix SLB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
6: Basic Parameters This chapter explains how to set the following basic configuration settings for the SLB using the SLB web interface or the CLI: Network parameters that determine how the SLB interacts with the attached network Firewall and routing Date and time Note: If you entered some of these settings using a Quick Setup procedure, you may update them here. Requirements If you assign a different IP address from the current one, it must be within a valid range, unique to your network, and with the same subnet mask as your workstation. To configure the unit, you need the following information: Eth1 IP address: Subnet mask: Eth2 IP address (optional Subnet mask (optional Gateway: DNS: SLB - Branch Office Manager User Guide 52
SLB - Branch Office Manager User Guide
52
6:
Basic Parameters
This chapter explains how to set the following basic configuration settings for the SLB using the
SLB web interface or the CLI:
Network parameters that determine how the SLB interacts with the attached network
Firewall and routing
Date and time
Note:
If you entered some of these settings using a Quick Setup procedure, you may
update them here.
Requirements
If you assign a different IP address from the current one, it must be within a valid range, unique to
your network, and with the same subnet mask as your workstation.
To configure the unit, you need the following information:
Eth1
IP address:
________ - ________ - ________ - ________
Subnet mask:
________ - ________ - ________ - ________
Eth2
IP address (optional):
________ - ________ - ________ - ________
Subnet mask (optional): ________ - ________ - ________ - ________
Gateway:
___________ - ___________ - ___________ - ___________
DNS:
___________ - ___________ - ___________ - ___________