Lantronix SLB Lantronix SLB - User Guide - Page 160

11: User Authentication Local and Remote User Settings The system administrator can configure the SLB to use local accounts and remote accounts to authenticate users. 1. Click the User Authentication tab and select the Local/Remote Users option. The following page displays. Figure 11-2 User Authentication > Local/Remote Users The top of the page has entry fields for enabling local and remote users and for setting password requirements. The bottom of the page displays a table listing and describing all local and remote users. To enable local and/or remote users: 2. Enter the following: Enable Local Users Select to enable all local users except sysadmin. The sysadmin is always available regardless of how you set the check box. Enabled by default. Multiple Sysadmin Web Logins Select to allow the sysadmin to have multiple simultaneous logins to the web interface. Disabled by default. Sysadmin Access Limited to Console Port Select to limit sysadmin logins to the Console Port only. Disabled by default. Authenticate only remote users who are in the remote users list Select the check box to authenticate users listed in the Remote Users list in the lower part of the page. Disabled by default. SLB - Branch Office Manager User Guide 160