Lantronix SLB Lantronix SLB - User Guide - Page 185

11: User Authentication Remote Authentication SSH Keys User Menus Web Access Diagnostics & Reports Reboot & Shutdown Firmware & Configuration Device Port Operations Device Port Configuration USB Power Outlets Right to assign a remote user to a user group and assign a set of rights to the user. Right to set SSH keys for authenticating users. Right to create a custom user menu for the CLI for Kerberos users. Right to access Web-Manager. Right to obtain diagnostic information and reports about the unit. Right to use the CLI or shut down the SLB and then reboot it. Right to upgrade the firmware on the unit and save or restore a configuration (all settings). Selecting this option automatically selects Reboot & Shutdown. Right to control device ports. Right to access to port settings. Right to enter modem settings for USB devices. Right to configure power outlets. 5. Click the Apply button. Note: You must reboot the unit before your changes will take effect. Kerberos Commands These commands for the command line interface correspond to the web page entries described above. To configure the SLB to use Kerberos to authenticate users who log in via the Web, SSH, Telnet, or the console port: set kerberos Parameters: accessoutlets breakseq clearports dataports escapeseq ipaddr kdc listenports port realm state useldapforlookup To set user group and permissions for Kerberos users: set kerberos group SLB - Branch Office Manager User Guide 185