Home » Lantronix Manuals » Electronics Accessories » Lantronix SLB » Manual Viewer

Lantronix SLB Lantronix SLB - User Guide - Page 209

Load Firmware Via Options, Configuration Management, Save to or Restore

Add to My Manuals
Save this manual to your list of manuals

Page 209 highlights

12: Maintenance Next Boot Bank Displays the current setting for bank to boot from at next reboot. Switch to Bank 2 If desired, select the alternate bank to boot from at next reboot. Copy configuration If checked, will copy the configuration from the current bank to the bank being from Bank 1 to Bank 2 updated. The two numbers are automatically generated so that the first during firmware update number is the current bank. Copy contents of Bank 1 to Bank 2 If checked, enables you to copy the current boot bank to the alternate boot bank. This process takes a few minutes to complete. Load Firmware Via Options NFS Mounted Dir USB Port FTP/SFTP/TFTP Server Path Login Password / Retype Password Select the NFS mounted directory from the drop-down menu. Click to select USB port. The IP address or host name of the server used for obtaining updates and saving or restoring configurations. May have up to 64 alphanumeric characters; may include hyphens and underscores. The default path on the server for obtaining firmware update files and getting and putting configuration save files. The userid for accessing the FTP server. May be blank. The FTP user password. Configuration Management Configuration Management From the option list, select one of the following:  No Save/Restore: Does not save or restore a configuration.  Save Configuration: Saves all settings to file, which can be backed up to a location that is not on the SLB.  Restore Factory Defaults: Restores factory defaults. If you select this option, the SLB reboots after you apply the update.  Restore Saved Configuration: Returns the SLB settings to a previously saved configuration. If you select this option, the SLB reboots after you apply the update. Save with Config or Preserve with Restore  Select the SSH Keys checkbox to save any imported or exported SSH keys.  Select the SSL Certificate checkbox to save an imported certificate.  Select the Scripts checkbox to save any interface or batch scripts. Disabled by default. Preserve Configuration after Restore Allows the user to keep a subset of the current configuration after restoring a configuration or resetting to factory defaults. Select the checkbox for each part of the current configuration you want to keep, for example, Networking, Services, or Device Ports. Configuration Name to If you selected to save or restore a configuration, enter a name for the Save to or Restore From configuration file (up to 12 characters). SLB - Branch Office Manager User Guide 209

Section	Page
SLB - Branch Office Manager User Guide	1
Copyright & Trademark	2
Open Source Software	2
Contacts	2
Disclaimer & Revisions	2
Revision History	3
Table of Contents	4
List of Figures	13
List of Tables	16
1: About this Guide	17
Purpose and Audience	17
Summary of Chapters	17
Additional Documentation	18
2: Introduction	19
Features	19
Models	22
System Features	23
Application Example	24
Hardware Features	25
3: Installation	29
What's in the Box	29
Technical Specifications	30
Physical Installation	31
Typical Installations	35
4: Quick Setup	36
Recommendations	36
IP Address	36
Method #1 Using the Front Panel Display	37
Method #2 Quick Setup on the Web Page	40
Method #3 Quick Setup on the Command Line Interface	42
Next Step	45
5: Web and Command Line Interfaces	46
Web Interface	46
Command Line Interface	48
6: Basic Parameters	52
Requirements	52
IP Filter	58
IP Filter Commands	62
Routing	63
VPN	65
7: Services	68
System Logging and Other Services	68
SSH/Telnet/Logging	68
SNMP	72
NFS and SMB/CIFS	75
Secure Lantronix Network	77
Date and Time	82
Web Server	84
iGoogle Gadgets	88
8: Device Ports	90
Connection Methods	90
Permissions	90
Device Status	91
Global Port Settings	91
Device Ports - Settings	94
Interacting with a Device Port	106
Device Ports - Logging	107
Console Port	112
Power Outlets	114
Host Lists	117
Scripts	121
Sites	134
Modem Dialing States	137
9: USB Port	141
Set Up of USB Storage	141
Manage Firmware and Configuration Files	148
USB Commands	148
10: Connections	150
Typical Setup Scenarios for the SLB	150
11: User Authentication	157
Local and Remote User Settings	160
NIS	168
LDAP	171
RADIUS	176
Kerberos	182
TACACS+	186
Groups	190
SSH Keys	193
Custom Menus	199
12: Maintenance	206
SLB Maintenance	206
Audit Log	219
Email Log	220
Diagnostics	221
Status/Reports	225
Emailing Logs and Reports	227
Events	230
LCD/Keypad	232
Banners	234
13: Application Examples	236
Dial-in (Text Mode) to a Remote Device	238
Local Serial Connection to Network Device via Telnet	239
14: Command Reference	241
Introduction to Commands	241
Administrative Commands	243
Audit Log Commands	251
Authentication Commands	251
Kerberos Commands	252
LDAP Commands	253
Local Users Commands	254
NIS Commands	257
RADIUS Commands	258
TACACS+ Commands	259
User Permissions Commands	260
CLI Commands	262
Connection Commands	264
Custom User Menu Commands	267
Date and Time Commands	269
Device Commands	270
Device Port Commands	271
Diagnostic Commands	274
End Device Commands	276
Events Commands	277
Group Commands	278
Host List Commands	279
IP Filter Commands	280
Logging Commands	281
Network Commands	282
NFS and SMB/CIFS Commands	285
Power Commands	286
Routing Commands	287
Services Commands	288
SLB Network Commands	289
SSH Key Commands	290
Status Commands	292
System Log Commands	294
USB Storage Commands	294
USB Modem Commands	295
Appendix A: Bootloader	297
Accessing the Bootloader	297
Bootload Commands	297
Appendix B: Security Considerations	298
Security Practice	298
Factors Affecting Security	298
Appendix C: Safety Information	299
Safety Precautions	299
Appendix D: Adapters and Pinouts	301
Appendix E: Protocol Glossary	304

Match case Limit results 1 per page

12: Maintenance

SLB - Branch Office Manager User Guide

209

Load Firmware Via Options

Configuration Management

Next Boot Bank

Displays the current setting for bank to boot from at next reboot.

Switch to Bank 2

If desired, select the alternate bank to boot from at next reboot.

Copy configuration

from Bank 1 to Bank 2

during firmware update

If checked, will copy the configuration from the current bank to the bank being

updated. The two numbers are automatically generated so that the first

number is the current bank.

Copy contents of

Bank 1 to Bank 2

If checked, enables you to copy the current boot bank to the alternate boot

bank. This process takes a few minutes to complete.

NFS Mounted Dir

Select the NFS mounted directory from the drop-down menu.

USB Port

Click to select USB port.

FTP/SFTP/TFTP

Server

The IP address or host name of the server used for obtaining updates and saving

or restoring configurations. May have up to 64 alphanumeric characters; may

include hyphens and underscores.

Path

The default path on the server for obtaining firmware update files and getting and

putting configuration save files.

The userid for accessing the FTP server. May be blank.

Password /

Retype Password

The FTP user password.

Configuration

Management

From the option list, select one of the following:



No Save/Restore:

Does not save or restore a configuration.



Save Configuration:

Saves all settings to file, which can be backed up to a

location that is not on the SLB.



Restore Factory Defaults: Restores factory defaults. If you select this option,

the SLB

reboots after you apply the update.



Restore Saved Configuration:

Returns the SLB settings to a previously

saved configuration. If you select this option, the SLB reboots after you apply

the update.

Save with Config or

Preserve with Restore



Select the

SSH Keys

checkbox to save any imported or exported SSH keys.



Select the

SSL Certificate

checkbox to save an imported certificate.



Select the

Scripts

checkbox to save any interface or batch scripts. Disabled

by default.

Preserve Configuration

after Restore

Allows the user to keep a subset of the current configuration after restoring a

configuration or resetting to factory defaults.

Select the checkbox for each part of the current configuration you want to keep,

for example, Networking, Services, or Device Ports.

Configuration Name to

Save to or Restore From

If you selected to save or restore a configuration, enter a name for the

configuration file (up to 12 characters).