Lantronix SLB Lantronix SLB - User Guide - Page 135

8: Device Ports CHAP Secret The CHAP secret associated with this site. If a modem has sites enabled and CHAP authentication enabled, then at dial-in, if the remote server sends a name in the CHAP challenge response that matches the CHAP host of a site, the CHAP secret for the site will be used to authenticate the CHAP challenge response sent by the remote server. Authentication The type of authentication, PAP or CHAP, for which this site is applicable. On dial-in authentication, only sites with the authentication type that matches the authentication type configured for the modem will be used to try to find a matching site. Timeout Logins For text dial-in connections, the connection can time out after the connection is inactive for a specified number of minutes. Negotiate IP Address If the SLB and the remote server should negotiate the IP addresses for each side of the PPP connection, select Yes. Select No if the address of the SLB (Local IP) and remote server (Remote IP) need to be specified. Static Route IP Address The Static Route IP Address, Subnet Mask and Gateway must be configured for dial-on-demand sites. The SLB will automatically dial-out and establish a PPP connection when IP traffic destined for the network specified by the static route needs to be sent. Note: Static Routing must be enabled on the Network - Routing page for dial-ondemand connections. Static Route Subnet The subnet mask for a dial-on-demand connection. Mask Static Route Gateway The gateway for a dial-on-demand connection. Dial-out Number The dial-out number must be specified for dial-on-demand sites. This indicates the phone number to dial when the SLB needs to send IP traffice for a dial-ondemand connection. Dial-out Login User ID for authentication when dialing out to a remote system. May have up to 32 characters. This ID is used for authenticating the SLB during the dial-out portion of a dial-back (including CBCP server) and dial-on-demand. Dial-out Password Enter the password for authentication when dialing out to a remote system. May have up to 64 characters. This password is used for authenticating the SLB during the dial-out portion of a dial-back (including CBCP server) and dial-ondemand. Retype Password Re-enter the password for authentication when dialing out to a remote system. May have up to 64 characters. This password is used for authenticating the SLB during the dial-out portion of a dial-back (including CBCP server) and dial-ondemand. Dial-back Number The phone number to dial on callback for text or PPP dial-back connections. A site must successfully authenticate, have Allow Dial-back enabled and have a Dial-back Number defined in order for the site to be used for callback. Allow Dial-back If enabled, the site is allowed to be used for dial-back connections. Dial-back Delay For dial-back and CBCP Server, the number of seconds between the dial-in and dial-out portions of the dialing sequence. Dial-back Retries For dial-back and CBCP Server, the number of times the SLB will retry the dialout portion of the dialing sequence if the first attempt to dial-out fails. Modem Timeout Timeout for dial-in and dial-on-demand PPP connections. Select Yes (default) for the SLB to terminate the connection if no traffic is received during the configured idle time. Enter a value of from 1 to 9999 seconds. The default is 30 seconds. Restart Delay The number of seconds after the modem timeout and before the SLB attempts another connection. The default is 30 seconds. SLB - Branch Office Manager User Guide 135