Lantronix SLB Lantronix SLB - User Guide - Page 236
: Application Examples, Telnet/SSH to a Remote Device
View all Lantronix SLB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 236 highlights
13: Application Examples Each SLB has multiple serial ports and two network ports. Each serial port can be connected to the console port of an IT device. Using a network port (in-band) or a modem (out-of-band) for dialup connection, an administrator can remotely access any of the connected IT devices using Telnet or SSH. Figure 13-1 SLB - Branch Office Manager Configuration This chapter includes three typical scenarios for using the SLB. The scenarios assume that the SLB is connected to the network and has already been assigned an IP address. In the examples, we use the command line interface. You can do the same things using the web page interface except for directly interacting with the SLB (direct command). Telnet/SSH to a Remote Device The following figure shows a Sun server connected to port 2 of the SLB. Figure 13-2 Remote User Connected to a SUN Server via the SLB Sun Server Remote User Internet SLB Branch Office Manager In this example, the sysadmin would: 1. Display the current settings for device port 2: [SLB]> show deviceport port 2 SLB - Branch Office Manager User Guide 236