Lantronix SLB Lantronix SLB - User Guide - Page 71

7: Services Telnet Enable Logins Web Telnet Enables or disables Telnet logins to the SLB to allow users to access the CLI using Telnet. Disabled by default. This setting does not control Telnet access to individual device ports. (See Device Ports - Settings (on page 94) for information on enabling Telnet access to individual ports.) You may want to keep this option disabled for security reasons. Enables or disables the ability to access the SLB command Iine interface or device ports (connect direct) through the Web Telnet window. Disabled by default. Timeout Outgoing Telnet If you enable Telnet logins, you can cause an idle connection to disconnect after a specified number of minutes. Select Yes and enter a value of from 1 to 30 minutes. Note: You must reboot the unit before a change will take effect. Enables or disables the ability to create Telnet out connections. Web SSH/Web Telnet Settings Java Terminal Deployment Java Terminal Buffer Size Method used to launch Java applications, either Java Web Start or Applet. Number of lines in the Java terminal window that are available for scrolling back through output. Phone Home Enable If enabled, allows SLB to directly contact an SLM and request addition to the database IP Address Last Attempt (view only) Results (view only) IP address of the SLM. Displays the date and time of last connection attempt. Indicates whether the attempt was successful. 3. To save, click the Apply button. SLB - Branch Office Manager User Guide 71