Lantronix SLB Lantronix SLB - User Guide - Page 282
Network Commands, Example, Syntax, Description, Parameters
View all Lantronix SLB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 282 highlights
14: Command Reference Local logging must be enabled for a device port for the locallog commands to be executed. To use the set locallog clear command, the user must have permission to clear port buffers (see Chapter 11: User Authentication). Example set deviceport port 2-5,6,12,15-16 baud 2400 locallogging enable show locallog Syntax show locallog [bytes ] Description Displays a specific number of bytes of data for a device port. 1K is the default. set locallog clear Syntax set locallog clear Description Clears the local log for a device port. The locallog commands can only be executed for a device port if local logging is enabled for the port. The set locallog clear command can only be executed if the user has permission to clear port buffers (see Chapter 11: User Authentication). Network Commands set network Syntax set network Parameters interval ipforwarding probes startprobes Description Sets TCP Keepalive and IP Forwarding network parameters. set network dns SLB - Branch Office Manager User Guide 282