Lantronix SLB Lantronix SLB - User Guide - Page 41
Network Settings, Accept, Apply
View all Lantronix SLB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Figure 4-5 Quick Setup 4: Quick Setup 4. To accept the defaults, select the Accept default Quick Setup settings checkbox in the top portion of the page and click the Apply button at the bottom of the page. Otherwise, continue with step 5. Note: Once you click the Apply button on the Quick Setup page, you can continue using the web interface to configure the SLB further. 5. Enter the following settings: Network Settings Note: Configurations with the same IP subnet on multiple interfaces (Ethernet or PPP) are not currently supported. Network Setting Eth 1 Settings Description Obtain from DHCP: Acquires IP address, subnet mask, hostname and gateway from the DHCP server. (The DHCP server may not provide the hostname gateway, depending on its setup.) This is the default setting. If you select this option, skip to Gateway. Obtain from BOOTP: Lets a network node request configuration information from a BOOTP "server" node. If you select this option, skip to Gateway. Specify: Lets you manually assign a static IP address, generally provided by the system administrator. SLB - Branch Office Manager User Guide 41